Playing Music; What Does The Led Colour Mean; Faq & Troubleshooting; Maintenance - Beyerdynamic Byron BTA Manual Del Usario

Byron BTA – In-ear headset

8.5 Playing music

• To enjoy the best audio quality, please set 70~80% from
the max. volume in your device.
• On first purchasing, the volume sets in level 8 of all 15
levels (please adjust with + or – button for volume).
Play / Pause: Press the MFB button briefly
Stop: Give the MFB button a long press
Volume up: Press the + button briefly
Volume down: Press the – button briefly
Next song: Give the + button a long press
Previous song: Give the – button a long press
9.

What does the LED colour mean?

Status
Standby
Battery is running low
Charging
Fully charged
Pairing mode
10. FAQ & Troubleshooting
• I hear crackling noise
– For the best audio quality, always place your in-ear headset close
to the mobile phone.
• I cannot hear anything
– Increase the volume on the headphone.
– Make sure that the in-ear headset is paired with the phone.
– If the in-ear headset fails to connect when you pressed the MFB
button, try to connect again by following the pairing procedure.
• I have problems with pairing even though my phone indicates
otherwise
– Please delete the in-ear headset paired to your mobile phone and
pair the in-ear headset again.
Please refer to set up "Pairing mode".
• Will the Byron BTA work with other Bluetooth equipment?
– The Byron BTA is designed to work with Bluetooth mobile,
computer or portable audio devices which are built in. It can also
work with other Bluetooth devices that are compliant with
Bluetooth version 1.1/1.2/2.0/2.1+EDR/3.0/4.0 and that support
HSP, HFP, A2DP and AVRCP.

11. Maintenance

• Make sure the in-ear headset is turned off when storing, and
protect it safely when it is not in use.
• Sunlight and high temperatures can affect battery life of the
Byron BTA and may be the cause of malfunction.
LED indication
LED off (if you press the button, the blue
LED blinks 5 times)
Red light blinks
Red light ON
Blue light ON
Blue light ON
13