Ec Declaration Of Conformity - AL-KO 450 A Manual De Instrucciones

en
Malfunction
Load pressure brake
does not open or close
Difficult lowering without
or without load
ADVICE
If you encounter any malfunctions that are not listed in this table, or which you cannot rectify
yourself, please contact our relevant customer service.

EC DECLARATION OF CONFORMITY

We herewith declare that this product, in the version introduced into trade by us, complies with the rele-
vant provisions of the EC directive and the harmonised standards named in the following.
Product
AL-KO cable winch
Type
450 A BASIC
900 A BASIC
Series
11817M05 - 11820M05
14
Cause
Brake worn or faulty
Brake disc moist or oily
Brake disc mechanism or brake
discs braced
Crank attachment thread is fixed
Manufacturer
ALOIS KOBER GmbH
Ichenhauser Str. 14
D-89359 Kötz
EC directives
2006/42/EC
Solution
Check brake parts and replace
worn parts
Clean or replace brake discs
Cable winch must not be under
load! Loosen the brake by gently
hitting the crank in the "lowering" di-
rection with the palm of your hand
You may need to block some
gear wheels until the crank loo-
sens.
Grease the crank attachment
thread
Grease the crank attachment thread
Duly authorised person
ALOIS KOBER GmbH
Head of Tech. Development
Standardisation / Data Ma-
nagement
Ichenhauser Str. 14
D-89359 Kötz
Harmonised standards
DIN EN 13157
EN ISO 12100
Kötz, 02.05.2017
Dr. Frank Sager
Technical leader
695 021_b