List Of Components - Inglesina mhome dream Manual De Instrucciones

LIST OF COMPONENTS

fig. 1
A
Right structure unit
B
Left structure unit
C
2 Connection tubes
D
Bed guard covering
BED GUARD ASSEMBLY
fig. 2 Assemble the right structure unit (A) together with the left unit (B), joining
them in the centre.
fig. 3 Join the 2 connection tubes (C).
fig. 4 Insert the tubes (C) into the joints of the structure unit (E), whilst applying gen-
tle pressure to expand the structure on both sides and paying attention to the
appropriate corresponding lead hole.
fig. 5 Open the bed guard up to the double locking CLICK.
fig. 6 Position the covering (D) on the bed guard so that the brand label is always on
the outside; make it stick completely, then fasten the zip (F).
fig. 7 Once the zip has been fastened, ensure that the sliding clip has been inserted
into the little protection pocket (G).
FIXING THE BED GUARD TO THE BED
fig. 8 Fix the bed guard to the bed structure and adjust the length of the straps (H) so
that, once assembled, it rests on the mattress properly.
INSTRUCTIONS
EN
25