Charging attention:
1.
Charging: Place the host on the charging station for charging.
(During charging, the indicator light
over, the light
Attention:When manual charging,
please keep the front bumper of
the robot 2cm away from the
charging station to ensure the
metal contacts connected well for
a successful charging
2.
The charging station cannot be used in environments with strong
reflection such as direct sunlight or nearby mirrors. If there is any
object with strong reflection, please cover it 7cm from the bottom.
3.
In order to ensure the normal working hours of the host, please fully
charge it before use. The charging time is about 5 hours.
4.
When charging, do not assemble the water tank assembly to the
robot vacuum, so as to ensure the safety of charging and prevent
wet mops from damaging the floor.
5.
During the cleaning process, the host can sense that its power is
insufficient and automatically start the recharging mode to find the
charging station to recharge. You can also command the host to
start the recharging mode through the recharging button
on the remote controller.
is always on. The charging time is about 5 hours.
flashes; If charging is