Manual Control - Hkoenig SWRC130 Manual De Usuario

(Attention: If the water tank is not installed, press the button
on the remote controller, the host will prompt that the water tank is not
installed and the host will not work at this status.)
Press the button
to single room cleaning mode.
Press the button
switch to border cleaning mode.
SINGLE ROOMM CLEANING
Applicable scenario: Used to clean the single room.
Setting method: Click the remote-control mode switch button
) to select the single room cleaning mode to start the single room
cleaning.
Friendly Reminder: When it is only necessary to clean a single room,
please close the door and the host will do centralized cleaning in the
room.
If this room does not have a charging station, the host will return to the
original point after finishing cleaning.
BORDER SWEEPING
Applicable scenario: For indoor border cleaning, the host cleans along
the perimeter of fixed objects (such as walls), and returns to the charging
station after the border cleaning finished.
Setting method: Click the remote control mode switch button
to select the border cleaning mode to start the border cleaning.

MANUAL CONTROL

Applicable scenario: Suitable for manual control cleaning.
Setting method: Click on the buttons
( ),the host will switch
( ), the host will
on the remote
( )
(
( )