Device Error Messages - Balluff BIP LD2-T017-01-EP Serie Manual De Instrucciones

BIP LD2-T017-01-EP _ _ / EP _ _ -S4
Inductive Positioning System
6
IO-Link interface (continued)
6.16

Device error messages

If access is faulty, the device responds with one of the
listed error codes.
Error code Error message
0×8011 Index not available
0×8012 Subindex not available
0x8023 Access denied
0×8030 Value out of range
0×8033 Parameter length overrun
0×8034 Parameter length underrun
0×8036 Function temporarily unavailable
0x8040 Invalid parameter set
0x8041 Inconsistent parameter set
Tab. 6-24: Error messages of IO-Link specification
www.balluff.com english 27