Notes To The User; Symbols And Conventions; Scope Of Delivery; Approvals And Markings - Balluff BIP LD2-T017-01-EP Serie Manual De Instrucciones

BIP LD2-T017-01-EP _ _ / EP _ _ -S4
Inductive Positioning System
1

Notes to the user

1.1 Validity
This guide describes the construction, function, and setup
options for the BIP inductive position measuring system
with IO-Link interface. It applies to models
BIP LD2-T017-01-EP _ _ -S4 and
BIP LD2-T017-01-EP _ _.
The guide is intended for qualified technical personnel.
Read this guide before installing and operating the BIP.
1.2

Symbols and conventions

Individual actions are indicated by a preceding triangle.
► Instruction 1
Action sequences are numbered consecutively:
1. Instruction 1
2. Instruction 2
Note, tip
This symbol indicates general notes.
Numbers unless otherwise indicated are decimals
(e.g. 23). Hexadecimal numbers are represented with a
preceding 0x (e.g. 0x17).
1.3

Scope of delivery

– BIP
– Condensed guide
4 english
1.4

Approvals and markings

The CE symbol confirms that our
products comply with the requirements
of the current EU directive.
The BIP meets the requirements of the following product
standard:
– EN 61326-2-3 (noise immunity and emission)
Emission tests:
– RF emission
EN 55011
Noise immunity tests:
– Static electricity (ESD) EN 61000-4-2
– Electromagnetic fields (RFI)
EN 61000-4-3
– Electrical fast transients (burst)
EN 61000-4-4
– Surge EN 61000-4-5
– Conducted interference
induced by high-frequency
fields
EN 61000-4-6
More detailed information on the guidelines,
approvals, and standards is included in the
declaration of conformity.
1.5

Abbreviations

ISDU Indexed Service Data Unit
MDC Measurement Data Channel
PD Process Data
PDV Process Data Variable
SSC Switching Signal Channel
Severity level 3
Severity level 3
Severity level 3
Severity level 2
Severity level 3