Remove The Lower Ball Seat Assembly And The Piston; Special Reassembly Instructions - Nordson ProBlue P4 Manual De Instrucciones

D‐26 SP Pump Diagnostics and Repair

Remove the Lower Ball Seat Assembly and the Piston

Part 1024496_05
CAUTION: Handle the piston with care. Damaging the precision machined
surface of the piston can result in failure of the pump.
See Figure D‐13.
1. Unscrew the lower ball seat assembly (2) from the pump body.
2. Pull the piston (1) out of the bottom of the pump body.
Pump body
P/N 1016863
Piston
P/N 1022658

Special Reassembly Instructions

S
Apply Never‐seez to the threads of the lower ball seat before reinstalling
the seat into the pump body.
S
Apply O‐ring lubricant to the lower ball seat O‐ring.
Check/Repair
Remove solidified
adhesive before
reassembly
Nicked or worn
Remove solidified
adhesive before
reassembly
E 2011 Nordson Corporation