Special Accessories; Ordering Spare Parts - Stihl MS 170 Manual De Instrucciones

In order to comply with the kickback
performance requirements of § 5.11 of
ANSI standard B 175.1-2000, do not use
replacement saw chain unless it has
been designated as meeting the ANSI
§ 5.11 requirements on this specific
powerhead, or has been designated as
"low kickback" saw chain* in accordance
with the ANSI B 175.1-2000 standard.
* see definition of "low kickback
chain" on page 18 of this manual.
MS 170, MS 180, MS 180 C

Special Accessories

Contact your STIHL dealer for
information regarding special
accessories that may be available for
your product.
English / USA

Ordering Spare Parts

Please enter your saw model, serial
number as well as the part numbers of
the guide bar and saw chain in the
spaces provided. This will make
re-ordering simpler.
The guide bar and saw chain are subject
to normal wear and tear.
When purchasing these parts, always
quote the saw model, the part numbers
and names of the parts.
Model
Serial number
Guide bar part number
Chain part number
For recommended STIHL reduced
kickback cutting attachments
see section "Specifications"
of this Owner's Manual.
57