Tools And Materials Required; Remove The Packaging - GE Profile PV970 Serie Manual Del Propietário

TOOLS AND MATERIALS REQUIRED

(NOT SUPPLIED)
Pencil and tape measure
Spirit level
Phillips screwdriver
bits, #2 Phillips head
Step ladder
Saber saw or Key Hole saw
UL listed wire nuts
Aluminized Strain relief for
Duct tape junction box
120V 60Hz. 15 or 20 Amp,
2-wire with ground, properly
grounded branch circuit
49-2000916 Rev. 0
Installation Preparation
Safety glasses
Hammer
Flashlight
Metal snips
Pliers
duct, length to
suit installation

REMOVE THE PACKAGING

CAUTION
Wear gloves to protect against
sharp edges.
other boxed parts.
plastic wrapping and other packaging materials.
11