Tools And Materials Required; Remove The Packaging - GE Profile PV977 Manual Del Propietario E Instrucciones De Instalación

TOOLS AND MATERIALS REQUIRED

(NOT SUPPLIED)
Pencil and tape measure
Spirit level
Phillips screwdriver
bits, #2 Phillips head
Step ladder
UL listed wire nuts
Aluminized Strain relief for
Duct tape junction box
10
Installation Preparation
Safety glasses
Hammer
Flashlight
Metal snips
Pliers
Saber saw or Key Hole saw
duct, length to
suit installation
120V 60Hz. 15 or 20 Amp,
2-wire with ground, properly
grounded branch circuit

REMOVE THE PACKAGING

CAUTION
Wear gloves to protect against
sharp edges.
other boxed parts.
plastic wrapping and other packaging materials.
49-2000915 Rev. 0