I Error Codes; Control Unit Display - Zodiac RV 5480 iQ Manual De Instalación Y De Uso

6.2 I Error codes

Control Unit
Display
Er : 01 Pump Motor
Er : 02 Tracti on Motor Right
Er : 03 Tracti on Motor Left
Pump Mo
Er : 04
tor Consumpti on
Drive Motor
Er : 05 Consumpti on
Right
Er : 06 Drive Motor
Consumpti on Left
Er : 07
Cleaner Out of the
Water
Er : 08
N/A N/A
Er : 10 Communicati on
N/A Connecti on Error
A red dot appears in
N/A the "My appliances"
list
If the problem persists, contact your retailer:
Dismissing an Error Code
From the Control Unit:
• Aft er you have completed the troubleshooti ng soluti on steps, press any key (except the phone icon) to clear the error
code.
• If the control unit is in Standby Mode, press the Start/Stop butt on to show the on-screen display. Aft er you have
completed the troubleshooti ng soluti on steps, press any key (except the phone icon) to clear the error code.
From the iAquaLink™ App:
• Press the error icon to display troubleshooti ng soluti ons. Aft er you have completed the troubleshooti ng soluti on
steps, press Clear Error to return to normal operati on. Or, press OK if you need to complete the soluti on steps at a
later ti me.
22
In-App Display
• Check for any small debris or cable impeding the brushes from turning
freely.
• Check for corrosion or bent pins in the power cable connecti on area.
• Turn each wheel one quarter turn in one directi on repeatedly unti l
rotati on is smooth.
• Repeat, turning wheels in the opposite directi on unti l rotati on is smooth.
• If this does not solve your problem, please contact your local retailer for
a diagnosti c review or call customer service.
• Check for small debris or hair in fan impeller.
• Thoroughly clean fi lter canister.
• If this does not solve your problem, please contact your local retailer for
a diagnosti c review or call customer service.
• Check for any small debris or cable impeding the brushes from turning
freely.
• Check for corrosion or bent pins in the power cable connecti on area.
• Turn each wheel one quarter turn in one directi on repeatedly unti l
rotati on is smooth.
• Repeat, turning wheels in the opposite directi on unti l rotati on is smooth.
• If this does not solve your problem, please contact your local retailer for
a diagnosti c review or call customer service.
• Turn off the cleaner and submerge.
• Thoroughly clean the fi lter canister.
• Shake to release air bubbles.
• Restart cycle.
• If this does not solve your problem, please contact your local retailer for
a diagnosti c review or call customer service.
• "The cleaner did not fi nish its cycle correctly.
• Restart a cleaning cycle"
• Turn cleaner power off and on again to reset.
• Check fl oati ng cable connecti on to control box.
• Check for corrosion or bent pins at connecti on point.
• If this does not solve your problem, please contact your local retailer for
a diagnosti c review or call customer service.
• Check the status of the LAN/WEB LEDs on the control box and follow the
steps described in the table "6.3 I Troubleshooti ng the connecti on to the
iAquaLink™ app".
• "Appliance not plugged in or not connected to the home Wi-Fi network.
If the dot is red when the control box is plugged in and if the LAN and
WEB icons are lit up, refresh the screen (by swiping downwards).
• If the dot turns green: the appliance is ready for use."
Suggested Soluti on