Remote Control Mode - Zodiac RV 5480 iQ Manual De Instalación Y De Uso

4.3.2 Start / Stop cleaning and adjust the cleaning ti me
• During confi gurati on of the cleaner, choosing the pool shape allows customised cleaning modes to be
set up
By default, the cleaning surface is Floor, Walls and Water Line.
• Immerse the cleaner in the pool.
• In the app's home screen, press START.
• The screen shows the remaining cleaning ti me in hours and minutes.
• To increase or reduce the cleaning ti me, press (+) or (-). These are 30-minute sequences with a minimum of 30
minutes and a maximum of 3 hours 30 minutes.
• The remaining cleaning ti me displayed in the app is the same as that displayed on the control unit.
• Press STOP to end a cleaning cycle.
4.3.3 Setti ng up a cleaning mode
• From the app's home screen, select Cleaning mode to view the opti ons.
• Select one of the default set-ups: Quick Clean, Deep Clean or Water line only. The mode selected is highlighted.
• In Customise, tap the pictograms to select the opti ons. The opti ons selected will be highlighted.
Surfaces: Floor only / Floor, walls and water line / Water line only
Cleaning intensity: Standard / High Intensity
• Press Save to save the new parameters or (X) to cancel.
• Press (X) return to the home screen.
• The new cleaning mode will take eff ect for the cleaning in progress and all future cycles.
• The cleaning cycle ti me may vary depending on the parameters selected.

4.3.4 Remote control mode

The cleaner may be controlled, using your smartphone or tablet as a remote control.
• Use the remote control mode only if you have the cleaner within view.
• In the app's home screen, select Remote control. The control unit is displayed
• Control the cleaner using joysti ck control or moti on control. the mode can be changed at any moment.
• Joysti ck Control: Press the icons to move the cleaner forward and backward and to turn left or right.
• Moti on Control: Control the cleaner by ti lti ng the mobile device up (backwards movement), down (forward movement),
left (turn left ), and right (turn right). The fi rst ti me you use it, moti on mode will be automati cally calibrated according
to the positi on of your hand. To change it, press the Re-Calibrate icon in the top left .
• Press (X) to return to the home screen.
• If the cleaner is relati vely slow to respond to an acti on requested in the app, check the Wi-Fi network
signal, see "4.2 I First-ti me cleaner confi gurati on"
14
.