Flama 1706 FL Manual De Usuario página 39

INSTRUCTIONS FOR USE
Precautions:
• Carefully read the instructions in this booklet, as they provide important information
about safe installation, use and maintenance. Keep this booklet with care for future
reference.
• Before using the appliance, make sure that it is in perfect working order from a
mechanical standpoint. The motor block, the receptacle, the blade and the jar should
show no breaks or cracks.
The sheath and the plug of the power cord should report no scratches or parting.
If so, immediately unplug the appliance from the mains outlet and take it to an
authorised Customer Service Centre for necessary checking.
• The use of this appliance by either children or disabled persons should be closely
monitored.
• Never immerse the motor block (1) in water, or any other liquid for that matter.
• After use, thoroughly clean the various attachments on contact with the food; to
achieve the above, comply with the tips and instructions detailed in the "Cleaning"
section.
• Do not put food in the work bowl (2) or the jar (7) whose temperature rises above
50°C.
• Food should never exceed 2/3 of the work bowl capacity (2).
• Do not put liquid or juicy food in the work bowl (2).
• Do not crush hard (coffee, shells/hulls, bones, etc.) or frozen foods.
• Never let the appliance run idly.
• To avoid getting cut, do not slip your fingers into the work bowl (2) or into the jar
(7), by the blade.
• Never use your fingers to remove leftovers, use appropriate attachments instead.
• Once the lid (4) has been removed, wait for the blade to come to a complete standstill
before opening the lid.
• Neither mount nor retrieve the jar (7) on/ from the motor block (1) without first
disconnecting the plug from the power socket.
• In order to prevent the appliance from overheating, both the quantities and timeframes
reported in the corresponding table should be respected for each mixing cycle. Let
the appliance rest for 2 minutes at least after each break. Whenever blending substantial
quantities, make sure to alternate work with appropriate breaks.
• Always disconnect the plug from the power socket after use.
• Blades are particularly sharp, handle them with the utmost care.
• Do not put the work bowl (2) or the jar (7) in the microwave oven.
CHOPPER
Description of the appliance (Fig. A):
1) Motor block
2) Work bowl
3) Blade group
4) Lid
5) Spatula
Description of the controls (Fig. A):
6) ON/OFF switch
Operation (Fig. B - C - D):
• Fasten the work bowl (2) to the motor block (1) (fig.B).
• Secure the blade group (3) to the rotating pin (1a) , making sure it clips into place
(fig. B).
37