Honda XRE300 Manual Del Propietário página 120

XRE300 · XRE300A
3. To set the hour, push the RESET button until the
desired hour is displayed.
The time is advanced by one hour, each time the

button is pushed.
The time advances fast when the button is pushed

and held.
4. Push the SEL button. The minute display will start
flashing.
5. To set the minute, push the RESET button until the
desired minute. The minute display will return to
''00'' when ''60'' is reached without affecting the
hour display.
The time advances by one minute, each time the

button is pushed.
The time advances fast when the button is pushed

and held.
6. To end the adjustment, push the SEL button.
The display will stop flashing.
If the SEL button and RESET button are not pushed
for 2 minutes, the display will stop flashing
automatically and the adjustment will be end.
If the ignition switch is turned to OFF when you
are adjusting the digital clock, the adjustment will
be cancelled.
The digital clock will reset if the battery is disconnected.
Reconnect the battery, the digital clock will display
1:00 and hour display flashing.
Adjust the digital clock.
23