Helmet Holder - Honda XRE300 Manual Del Propietário

38

Helmet Holder

The helmet holder (1) is on the left side below the
left side cover.
Insert the ignition key (2) and turn it counterclockwise
to unlock. Hang your helmet on the holder pin (3).
Turn the key clockwise to lock the holder and then
remove the key.
If you secure two helmets, use the helmet holder
wire (page 56).
(3) (2)
(1)
(1) Helmet holder
(2) Ignition key
(3) Holder pin
W
!
arning
Riding with a helmet attached to the holder can

interfere with the rear wheel or suspension and
could cause a crash in which you can be seriously
hurt or killed.
Use the helmet holder only while parked. Do not

ride with a helmet secured by the holder.
XRE300 · XRE300A