Honda XRE300 Manual Del Propietário página 169

72
Installation
1. Install the side collar into the left side wheel hub.
2. Install the front wheel hub sensor (1) in the right
wheel hub.
3. Position the wheel between the fork legs and
insert the front axle shaft from the right side,
through the right fork leg and wheel hub.
To avoid damaging the brake pads while
installing the wheel, carefully fit the brake disc
between the pads.
4. Make sure that the lug (2) on the right fork leg
is located in the slot (3) of the front wheel hub
sensor.
(1)
(2)
(3)
XRE300 · XRE300A
(1) Front wheel hub
sensor
(2) Lug
(3) Slot