Cleaning Tips - Nilfisk POWER ECO Instrucciones De Manejo

F
Parking the tube and nozzle
There are two grooves for parking.
One located on the underside to use
when machine stands on the back,
and the other on the back to use when
the machine is standing on its wheels.
Thermal fuse
The vacuum cleaner is fi tted with a
thermal fuse, which prevents it from
overheating. If the thermal fuse blows,
the vacuum cleaner stops and must
cool down before it can be started
again.
Restart
1. Turn off the machine and unplug
from the wall socket.
2. Check that nothing blocks the air
fl ow through bent tube, hose, tube,
nozzle, dust bag or fi lters.
3. Let the machine cool down, for at
least 5-10 minutes.
4. Plug in the machine again and
start using the start/stop button.
The machine will not start
until it is suffi ciently cool. If the
machine does not start turn it off
using the start/stop button and
unplug. Try again in a while.

Cleaning tips

Adjust the suction power by means of
the slide control on top of the vacuum
cleaner or the sliding valve on the
hose handle.
G Crevice nozzle
Use the crevice nozzle for narrow
spaces.
H Upholstery nozzle
Use the upholstery nozzle for
upholstered furniture.
I Brush nozzle
Use the brush nozzle for curtains and
window sills.
J Hard fl oor nozzle
Use the nozzle for hard fl oors.
K Combination nozzle
Adjust the combination nozzle
depending on type of fl oor.
L Turbo nozzle
Use the turbo nozzle for effi cient
carpet cleaning.
The different models of these vacuum
cleaners can include different nozzles.
E
n
g
l
i
s
h
6