Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
b
Y_&_
$_ra_on'
_
powE_ P_ODUCTS
° SHidethe nozzHe forward to adjust the spray to How
pressure mode (Figure H6).SHidethe nozzHe backward to
achieve high pressure.
SHidenozzHe backward
for high pressure mode.
SHidenozzHe forward
for
How pressure mode and
detergent application.
° Point the nozzHe down towards a firm surface and press
the trigger to test the pattern (Figure H 7).
° Twisting the nozzHe adjusts the spray pattern from a
narrow
pattern to a fan pattern (Figure H8).
Twist nozzHe
countercHockwise
for fan
spray pattern,
Twist nozzHe cHockwise
for narrow spray
pattern.
° For most effective
cHeaning, keep the spray nozzHe
between
8 to 24 inches away from cHeaning surface.
. If you get the spray nozzHe too chose, especiaHHy using high
pressure
mode,you
may damage the surface
being
cHeaned.
. Do Noe get cHoser than 8 inches when
cHeaning tires.
Applying
Detergent
with
the
Adjustable
Nozzle
CAUTION!
You must aeeach all hoses before you start
the engine. Starting the engine without
all the hoses
connected and without
the water turned ON wiHH damage
the pump.
IMPORTANT:
Use soaps designed
speci_cammy for
pressure
washers.
HousehoHd detergents
couHd damage
the pump.
To apply
deeergene,
follow
ehese
steps:
* Review
the use of adjustabHe
nozzHes.
* Prepare
detergent
soHution
as required
by the
manufacturer.
° Hang the detergent
soHution
on the "J" hook
attached
to
the accessory
tray, as shown
in Figure
H9.
° PHace the smaHHfiHter end of the detergent
siphoning
tube
into the detergent
container.
CAUTION!
Keep the detergent
siphoning tube from
coming in contact with the hot muffler.
. SHidethe adjustable nozzle forward to How pressure
mode. Detergent
cannot be appHied with the nozzle in
high pressure position.
IO
Publicidad
Tabla de contenido
