Olimpia splendid CALDO CRYSTAL Instruccioes Para La Instalación, Uso Y Mantenimiento página 47

When the appliance is turned off, the remote control display shows hour and minutes.
When the appliance is turned on, the hour visualization is replaced by the set tem-
perature.
To set time:
a. Press button
b. Press buttons
c. Press
to confirm and pass to the minutes setting.
d. Press buttons
e. Press to confirm.
9.4 - Protection from overheating
The appliance is equipped with a protection system from overheating which turns it
off if it overheats.
In this case:
a. turn the appliance off;
b. remove the possible cause (air intake grid clogged, obstacles in front of the air
outlet or inlet, etc.);
c. let the appliance cool down for 15/20 minutes;
d. restart the appliance.
If the issue persists, turn the appliance off, disconnect the plug from the power outlet
and please contact the retailer or the technical assistance service.
9.3 - Hour/Minutes setting
until when hour starts flashing.
and to set the hour.
and to set the minutes.
EN - 21
CALDO CRYSTAL