Nomenclature And Functions; Rear Panel - Canon RE-455X Manual De Instrucciones

1

NOMENCLATURE AND FUNCTIONS

Camera head
Arm

Rear panel

Arm lock release
lever
Press to fold/unfold
the arm
Power switch (see page 11)
Rear Panel
See page 15 for system construction.
VIDEO OUT terminal
RGB OUT terminals
RGB IN
RGB IN terminal
Lens cap
After turning the power OFF, wait at least 5 seconds before turning the power
NOTICE
ON again. Turning the power ON too soon may cause a malfunction.
The illumination lamps do not light up immediately after the LIGHTS button is
pressed. To protect the lamps, the system preheats for 3 seconds, then turns
the lamps on.
S-VIDEO OUT terminal
RS-232C terminal
VIDEO S VIDEO RS-232C
OUT OUT
RGB OUT
Illumination lamp
Illumination lamp for reflection copies.
Pressing the LIGHTS button on the
operation panel turns the lamp on. The
angle of the lamp is adjustable.
Document table
Operation panel
Carrying handle
Pull out to carry the unit.
Use this terminal when controlling the RE-455X
remotely with a computer using various
commands (see page 15, 18).
AC INLET
E
AC inlet
6