HP SCANJET N6350 Guía De Instalación Inicial página 7

Review the following information before you install the software.
• For information about using non-HP software with the scanner, see "Associate a quick
start button with non-HP scanning software" on page 7.
• The software and the number of CDs that ship with the scanner can vary by country/
region.
• You are limited to three installations of the third-party applications that shipped with
your scanner. To purchase additional licenses, see www.hp.com, search on your
scanner model, find the product overview page, and then click the Specifications
or Accessories tab.
CAUTION: Do not connect the USB cable until you are prompted during the software
installation.
1. Decide what software to install.
• If you will be using the scanner with document-management or scanning software
that you already own, you only need to install the HP Scanjet drivers and
HP Scanner Tools Utility.
• If you do not already have document-management and scanning software, you
can use the HP scanning software that shipped with the scanner. Read the
onscreen descriptions of the software during the installation to decide what
software to install.
2. Insert the HP Scanning Software CD that came with the scanner into the computer
CD drive.
Wait for the installation dialog box to appear, and then follow the onscreen
instructions.
3. On the Connection Type dialog box, select the type of connection.
• Use the USB cable to connect the scanner only to this computer (non-
networked). Select this option to connect the scanner directly to a computer.
• Use the Ethernet cable to connect this scanner to the network. Select this
option to connect the scanner to a network.
• Connect to a scanner that is already installed on the network. Select this
option to connect to a scanner that already exists on the network.
4. Click Next and follow the onscreen instructions to complete the scanner installation.
5. When prompted to connect to the device, complete the connection task appropriate
to the type of connection you selected on the Connection Type dialog box.
• If you selected the USB connection option, see "Connect the USB cable"
on page 5.
• If you selected the Ethernet connection option, see "Connect the Ethernet
cable" on page 4.
Install the software 3