Product Care And Support; Scanner Leds; Maintenance, Troubleshooting, And Support - HP SCANJET N6350 Guía De Instalación Inicial

3

Product care and support

This section describes the options for product support.

Scanner LEDs

The scanner has two LEDs on the front panel that indicate scanner functions and error
conditions. The LED in the shape of an exclamation point (!) is the Attention LED, and
the LED in the Power button is the Power LED. The table below explains how to interpret
the indicator LEDs.
The Attention LED
quickly blinks amber.
The Attention LED is lit
with a steady amber
light.

Maintenance, troubleshooting, and support

Occasional cleaning of the scanner helps ensure higher-quality scans. The amount of
care necessary depends upon several factors, including the amount of use and the
environment. You should perform routine cleaning as necessary.
Routine cleaning and maintenance should include cleaning the automatic document
feeder (ADF), the scanner glass, and the transparent materials adapter (TMA).
The Power LED is
lit with a steady green
light.
The Power LED is
lit with a steady green
light.
The Power LED
slowly blinks green.
The Power LED is
lit with a steady, dim
amber light.
The Power LED is
lit with a steady green
light.
Both LEDs are off.
Error condition. Check the scanner LCD for
an error message.
Fatal error condition. The scanner LCD
indicates that you should turn off the
scanner, then turn it on after 60 seconds.
The scanner is warming up or scanning an
original.
The scanner is in Sleep mode.
The scanner is on and ready to scan.
There is no power to the scanner.
Product care and support 19