Ferroli OMNIA M 3.2 Manual De Instalación Y Del Propietario página 175

Module protection
DC generatrix low voltage
protection Heat pump
syserm high pressure
protection
DC generatrix high voltage
protection Heat pump syserm
high pressure protection
MCE malfunction
Zero speed protection
Phase sequence protection
Speed difference >15Hz
protection between
the front and the back clock
Speed difference >15Hz
protection between
the real and the setting speed
1. Check the Heat pump system pressure.
2. Check the phase resistance of compressor.
3. Check the U V W power line connection sequence
between the inventer board and the compressor.
4. Check the L1 L2 L3 power line connection between the
inventer board and the Filter board
5. Check the inventer board.
76