Configuring The Network - Hitachi CSNET WEB Manual De Instalación Y Funcionamiento

CSNET WEB
Installation & Operation Manual
CSNET WEB home screen

6.1. Configuring the Network
Initial system configuration is performed using the buttons at the
bottom left part of CSNET WEB's main window
Click on Configure System to initiate the configuration of the
System.
a. Address, Port
IP, Mask, Gateway:
You must adapt the configuration of CSNET WEB to
that of the network it is connected. The data you enter
must match the network's configuration.
Click Change to open the window for change the data.
Page 11
PMML0163A-rev.0 - 03/2008