Step 4: Door Removal & Adjustment; To Reinstall The Oven Door; To Remove The Oven Door - Thermador PROFESSIONAL PRO GRAND PRD364JDGC Manual De Instalación

Para estufas mixtas
Ocultar thumbs Ver también para PROFESSIONAL PRO GRAND PRD364JDGC:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Step 4: Door Removal and
Adjustment
CAUTION!
USE CAUTION WHEN REMOVING THE DOOR.
THE DOOR IS VERY HEAVY. Use both hands to
remove or replace the door. Failure to grasp the
oven door firmly and properly could result in
personal injury and product damage.
Make sure oven is cool and power to the oven has
been turned off before removing the door. Failure to
do so could result in electrical shock or burns.
With the door off, never release the levers and try to
close the hinges. Without the weight of the door, the
powerful springs will snap the hinges closed with
great force.

To Remove the Oven Door

Figure 9: Door Removal

To Reinstall the Oven Door

To Check Door Fit and Adjustment
1. Open and close the door slowly to test the movement
and the fit of the door to the oven cavity. Do not force
the door to open or close. If the door is properly
installed, it should move smoothly and rest straight on
the front of the range when closed.
2. The range must be level for proper alignment of the
oven doors, see "Step 9: Placing and Leveling the
Range".
3. If the door does not operate correctly, verify that the
hinges are properly seated into the hinge slots, and
that the hinge clips are fully engaged into the slots.
Figure 10: Door Install
English 11

Publicidad

Tabla de contenido
loading

Tabla de contenido