Step 7: Backguard Installation - Thermador Professional PRO-GRAND PD36 Serie Instrucciones De Instalación

Step 7: Backguard Installation
The backguard must be attached before sliding the
range into the final installed position. A Low Back or
Pot and Pan Shelf must be installed when there is less
than a 12" clearance between combustibles and the
back of the range above the cooking surface. (See
Fig. 2A and 2B on Page 7).
An Island Trim is available for covering the backguard
mounting flanges for island installations, where there
is a minimum of 12" of horizontal clearance between
combustibles and the back of the range. (See Fig. 2B
on Page 7).
The backguard is inserted, as shown in Fig. 14, into
the guide channels on the back of the range. Secure
the backguard with the (4) sheet metal screws pro-
vided.
WARNING
To avoid possible burn or fire hazard, a
backguard designed specifically forthis
range must be installed whenever the
range is used.
CAUTION:
The Pot and Pan Shelf can get very hot!
DO NOT place:
- plastics or containers that can melt
- flammable items
- a total load over 30 pounds (13.6kg)
FIG. 14
Front of Unit
!
on top of the Pot and Pan Shelf.
Chart C: BACKGUARD KIT MODEL NUMBERS
RANGEMODEL NO. 9"STD. LOW BACK 12" LOW BACK
PD304 Included with Range N/A
PD36 N/A LB36R
PD48 N/A LB48R
22" POT AND PAN SHELF
HS30R
HS36R
HS48R
Backguard
Installed
3-3/4'' ISLAND TRIM
IT30R
IT36R
IT48R
17