Step 2: Cabinet Preparation - Thermador Professional PRO-GRAND PD36 Serie Instrucciones De Instalación

Step 2: Cabinet Preparation
CAUTION:
Do not install the Models PD304 and PD48 ranges such that the
oven door is flush with the cabinet face. A flush installation could
result in damage to the cabinets due to exposure to high heat.
As defined in the "National
Fuel Gas Code" (ANSI
Z223.1, Latest Edition).
FIG. 1 Cabinet Clearances
00
_|Ik 30" Min. to 36" Max. bottom of
/
overhead Hood to cooking
surface (36" if hood contains
18" Min. combustible materials /_ )
"35-3/8" Min. Range Height
with Leveling Legs fully
retracted
"36-3/4" Max. Range Height
with Leveling Legs fully
extended.
For 30" Ranges _ 30" or 36" Wide Hood
L 42" or 48" for Island
For 36" Ranges _ 36" or 42" Wide Hood
L
42" or 48" for Island \ l
For 48" Ranges _ 48" or 60" Wide Hood \
L 48", 54" or 60" for Island
Min. Distance Between Overhead Ul--_, ! o
Cabinets of Combustible Material
30" Range - 30"
36" Range - 36" }'_': !
48" Range - 48" 13" Max.
Cabinet
Depth CAUTION: See Figs.
3" Min. to _ 2A, and 2B. 36"
combustible] Min. to combustible
.4._ Rangewidth ___}_ 4( side wall }_1 material A,
30", 36" or 48" material/_ ,i from cooking
SurfaceC°°king (both sides) _ace
I !
I I
-J
For Electrical and Gas Supply Zone,
see Figure 3A. Zone size and position
differ according to the model.
o
o
\
/_ as defined in the "National Fuel Gas Code" (ANSI Z223.1,
Latest Edition). *The range height is adjustable. The level of the
range top must be at the same level or above the countertop level.