T-V Link Functions - JVC AV-32Z25EU Manual De Instrucciones

Setting up your TV
6 Press the a
T-V LINK menu
T-V LINK
DOWNLOAD TV
BACK
TV OK
EXIT
D0005-EN
7 If you do not have a T-V LINK
compatible VCR connected:
Press the b button to exit the T-V LINK
menu.
The T-V LINK menu disappears.
If you have a T-V LINK compatible
VCR connected to the EXT-2
terminal:
Follow the operating procedure
"Downloading the data to VCR" on
page 40 to transmit the Programme
number (PR) data.
Now, the initial settings are complete,
and you can watch the TV
• When your TV can detect the TV channel
name from the TV channel broadcast
signal, it automatically registers the TV
channel name (ID) to the Programme
number (PR) in which the TV channel has
been registered.
• If a TV channel you want to view is not
set to a Programme number (PR),
manually set it using the MANUAL
function. For details, see "EDIT/
MANUAL" on page 34.
• The TV channel is not registered in
Programme number PR 0 (AV). When
you want to register a TV channel to PR 0
(AV), manually set it using the
MANUAL function. For details, see
"EDIT/MANUAL" on page 34.
6
a button to display the
a a
VCR

T-V LINK FUNCTIONS

When a T-V LINK compatible VCR is
connected to the EXT-2 Terminal on the TV,
it is easier to set up the VCR and to view
videos. T-V LINK uses the following
features:
To use T-V LINK functions:
A T-V LINK compatible VCR is necessary.
The VCR must be connected to the EXT-2
terminal on the TV by a fully wired SCART
cable.
A "T-V LINK compatible VCR" means a
JVC VCR with the T-V LINK logo or a VCR
with one of the following logos. However,
these VCRs may support some or all of the
features described below. For details, refer to
your VCR instruction manual.
"Q-LINK" (a trademark of Panasonic
Corporation)
"Data Logic" (a trademark of Metz
Corporation)
"Easy Link" (a trademark of Phillips
Corporation)
"Megalogic" (a trademark of Grundig
Corporation)
"SMARTLINK" (a trademark of Sony
Corporation)