General Information; Package Content; Accessory Installation - WEG EEN2 SCA06 Guía De Instalación, Configuración Y Operación

Do not perform any high pot tests with the servo drive!
NOTE!
Servo drives may interfere in other electronic equipment. Follow the recommended
procedures to minimize these effects.
NOTE!
Read the user's manual completely before installing or operating the servo drive.

2 GENERAL INFORMATION

This guide contains information regarding the installation, configuration and operation of the
EEN2 optional module. This module is dedicated to encoder input expansion and a repeater
output used by SCA06.
ATTENTION!
De-energize the control module before inserting or removing the accessory.
NOTE!
The accessory EEN2 can be connected to Slot 1, Slot 2 or Slot 3.

3 PACKAGE CONTENT

Accessory module in anti-static package.
„
Installation, configuration and operation guide.
„

4 ACCESSORY INSTALLATION

The optional modules are easily connected to the servo drive SCA06 through the plug-and-play
concept. However, some caution must be taken:
1. Turn off the control module of the servo drive.
If necessary, contact WEG.
Encoder Input Expansion Module - EEN2
SCA06 | 7