Benning MM 1 Instrucciones De Servicio página 10

Digital Multimeter for
- AC voltage measurement
- DC voltage measurement
- DC current measurement
- Resistance measurement
- Continuity testing
- Diode testing
Index of Contents
1. Operating instructions
2. Safety instructions
3. Contents of delivery
4. Meter description
5. General Specifications
6. Environmental Conditions
7. Electrical Specifications
8. Measuring with BENNING MM 1
9. Maintenance
10. How to use the protective rubber holster
1. Operating Instructions
This operating manual is intended for
- electrical professionals
- qualified electrotechnical persons
The BENNING MM 1 is designed for measuring in dry conditions and must not
be used on electrical circuits with a rated voltage greater than 600 V AC or DC
(for details refer to "Environmental Conditions" section).
The following symbols appear in this manual and on the BENNING MM 1:

This symbol indicates dangerous voltage.

This symbol indicates warnings and cautions to be observed when
using the BENNING MM 1 (refer to manual!)
This symbol on the BENNING MM 1 indicates that the BENNING MM 1
has double insulation (Protection Class II)
This symbol appears in the display when the battery is low.
This symbol indicates the "Continuity testing" mode is selected.
This symbol indicates the "Diode testing" mode is selected.
The buzzer sounds for acoustic test results.
(DC) Direct voltage or current
(AC) Alternating voltage or current.
Ground (voltage against earth)
10/ 2004
Operating manual
BENNING MM 1
BENNING MM 1

8