caprari D Serie Instrucciones De Servicio página 11

1.4 Example of code
DXN03M/G
Series D = drainage
M = sewage
Frequency
mechanical construction type
Hydraulic type
Motor construction code
Electric pump feeding
Speciality = no indication
... = various specialities
Poles
Optional
G
BAM / 3/4" = pumps MA model complete with duck-foot pedestal
BAMF/E 2" = pumps MAV15T4 model complete with duck-foot
Become thoroughly familiar with the instructions in the documents consigned with the pump. This will enable you to work in complete safety and to
obtain the best performance the pump is able to offer.
The following instructions apply to the standard version of the electric pump operating in normal conditions. Special versions, shown by the product
manufacturer being obliged to give advance warning.
forms of guarantee, while the manufacturer shall not be held responsible for any deriving damages to persons, animals or property.
Before operating the pump in any way, always check that the electrical parts of the system on which work is to be carried out are not
connected to the electricity main.
IThe electric pump described in this manual is designed for use in industry, building sites and homes. As such, it may only be serviced, repaired and
management may also be carried out by unspecialized personnel so long as they have become fully familiar with the contents of this manual and
any other documentation supplied with the product.
Always comply with all the safety, accident-prevention and anti-pollution instructions in the manual during each individual operation, together with all
the more restrictive local provisions in merit.
For safety reasons and to ensure compliance with the warranty conditions, the purchaser is forbidden to use the pump should this become faulty or in
the event of a sudden variation in the performances of the pump itself.
Installation must be such as to prevent accidental contacts which could represent a hazard for persons, animals and property.
Inspection and servicing procedures must be carried out to prevent all forms of risk following malfunction of the pump unit.
Consult the "Handling and storage" chapter for safe handling and storage.
3 DESCRIPTION OF THE PRODUCT AND USE
3.1
Submersed electric pumps of the D-M/DS-MS series are particularly designed to pump clean and dirty water containing small solids in suspension.
The width of the slits in the strainer head in series D/DS or the free pipe passage in series M/MS establish the maximum size of the solids in
suspension that can be conveyed by the pump.
When the product is installed according to the instructions given in this manual and in compliance with the diagrams, the acoustic pressure level
and, according to EC Regulations, the gauging points were 1 meter from the reference surface of the machine and 1.6 meters from ground or access
platform level.
The maximum value is evenly distributed around the unit.
Caprari S.p.A.
D
M
S
= 50Hz
S = 60 Hz
M = single-phase
T = threephase
= no indication
for automatic coupling
pedestal for automatic coupling
N
D
A
U
M
03
X
H
T
...
R
L
V
M
T
D - M / DS - MS
2
/ G
4
BAM 3/4"
BAMF/E 2"
GB
11