Installing The Door Station - SOMFY V100 Manual De Instalacion Y Uso

Video door phone V100
Avoid installing the camera facing a light source, as images of visitors may be impaired.
We recommend that silicon sealant is applied between the rain shield and the wall/pillar (but not below the rain shield) and that the door station is fitted
at a height of approximately 1.60 m.
[1]. Route all the cables into the rain shield.
[2]. Fix the rain shield to the wall/pillar.
[3]. Connect:
• the monitor cable to the first 2 terminals on the door station:
M+ of the monitor to M+ of the door station
M- of the monitor to M- of the door station
• the motorisation cable to the dry contact output (COM and
NO) of the door station
• the electric door-opener/lock cable to terminals + and - of
the door station.
Note: To feed the cables into the terminals, use a screwdriver
to press on the square with the notch, feed the wires
in, then release.
[4]. Position the door station in the rain shield.
[5]. Screw the door station to the rain shield using the Allen
key.
Copyright © 2018 SOMFY ACTIVITES SA. All rights reserved.

5. INSTALLING THE DOOR STATION

1
2
3
Monitor cable
Gate motorisation cable
4
EN
Electric door-
opener/lock cable
5
8