Assembly - Tunturi Sprinter Manual De Instrucciones

Assembly

Note about assembling the equipment
Start by unpacking the equipment. The detailed assembly
instructions can be found at the back of this guide. Follow
the instructions in given order.
Before assembly, check the contents of the package. If a
part is missing, please contact your dealer with the model,
equipment serial no. and spare part no. of the missing
part. You'll find a spare part list at the back of this guide.
The hardware kit contents are marked with * in the spare
parts list. The directions left, right, front and back are
defined as seen from the exercising position. Keep the
assembly tools, as you may need them e.g. for adjusting
the equipment. Note that two people are needed for the
assembly.
The packaging includes a silicate bag for absorbing
moisture during storage and transportation. Please dispose
of the bag once you have unpacked the equipment. Allow
at least 100 cm of clearance around the equipment. We
also recommend opening the package and assembling
the product on a protective base.
1.
Step 1: Front and rear support post Assembly
1. Install the front and rear support post with four
3/8"×3-1/2" carriage bolts (81), four 3/8" curved
washers(83) and four 3/8" cap nuts(82). The front
and rear support post are different. Be sure to assem-
ble the support post with the transport wheels onto the
front of the bike.
Sprinter
3