Maintenance And Cleaning - Bosch PROFESSIONAL GSR 12 VE-2 Instrucciones De Servicio

2 609 932 156.book Seite 5 Dienstag, 29. März 2005 9:26 09
Operating Instructions
Apply the power tool to the screw /nut only
when it is switched off.
Use only screwdriver bits that fit properly in the
head of the screw.
When driving in larger and/or longer screws in
hard material, it is advisable to drill a pilot hole
first.
For drilling in metal, use only perfectly sharp-
ened HSS drill bits. The appropriate quality is
guaranteed by the Bosch accessories pro-
gram.
Soft Grip
The gripping surface 10 (soft grip) reduces the
danger of slipping and thereby improves the grip
on the machine and the handling.
At the same time, the rubber coating achieves a
vibration-reducing effect.

Maintenance and Cleaning

For safe and proper working, always keep the
machine and its ventilation slots clean.
Carbon Brush Replacement
(see figure )
F
When the brushes are worn, the power tool
switches off automatically. For replacement of
the carbon brushes, loosen the screws and re-
move the cover lids 16. Insert a screwdriver or
similar into the notch of the brush holder 17 and
carefully pry it out. Remove the used carbon
brush and replace. The new carbon brush can
also be inserted when turned by 180°. Lightly
press down the new carbon brush until it clicks.
Afterwards mount the cover lids 16 again.
If the machine should fail despite the care taken
in manufacturing and testing procedures, repair
should be carried out by an authorized after-sales
service agent for Bosch power tools.
In all correspondence and spare parts orders,
please always include the 10-digit article number
given on the nameplate of the machine.
16 • 2 609 932 156 • TMS • 21.02.05
Disposal
Power tools, accessories and packaging should
be sorted for environmental-friendly recycling.
Only for EC countries:
Do not dispose of power tools into
household waste!
According to the European Direc-
tive 2002/96/EC on waste electrical
and electronic equipment and its in-
corporation into national law, power
tools that are no longer suitable for use must be
separately collected and sent for recovery in an
environmental-friendly manner.
Battery packs/batteries:
Ni-Cd: Nickel-cadmium
Warning: These battery packs contain cadmium,
a highly-toxic heavy metal.
Ni-MH: Nickel-metal hydride
Do not dispose of battery packs/batteries into
household waste, water or fire. Battery packs /
batteries must be collected, recycled or disposed
of in an environmentally-friendly way.
Only for EC countries:
Defective or dead batteries must be recycled ac-
cording to the directive 91/157/EEC.
Batteries no longer suitable for use can be
directly returned at:
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham-Uxbridge
Middlesex UB 9 5HJ
Service
............................
Advice line
....................
Fax
.............................................
English - 5
+44 (0) 18 95 / 83 87 82
+44 (0) 18 95 / 83 87 91
+44 (0) 18 95 / 83 87 89