Important - Shark SK410 Serie Guia Del Usuario

fig. 3
fig. 2
fig. 1
IMPORTANT: Always make sure that the Steam &
Spray Mop is UNPLUGGED from the wall when
™
not in use. Never change or remove the cleaning
pad when the appliance is plugged into the wall.
Use ONLY Steam Energized
addition of other chemicals or cleaning solutions
may damage the appliance, void the warranty and
could be unsafe for you and your family.
Cleanser. The
™
fig. 4
fig. 5
ASSEMBLY
1 Insert the handle into the neck of the main body of
the Steam & Spray
™
main body of the appliance together until you hear
it "click" into place. (Fig. 1)
2 Insert the power cord plug into the power cord
receptacle on the unit. (Fig. 2)
3 Hold the power cord and wrap it around the cord
holders. (Fig. 3)
4 Remove the battery cover and insert the 4 AA
batteries. (Fig. 4) Replace the battery cover.
5 Place the Steam & Spray
Cleaning Pad. (Fig. 5)
If using the washable cleaning pad, ensure that the
Velcro side is facing up and the tab is in the back.
®
If using the SaniFiber
logo side is facing up.
www.sharkclean.com
Cleaning Pad
Mop. Push the mop handle and
Mop unit on top of the
™
cleaning pad, ensure the
™
3