Spot Cleaning Mode - ECOVACS ROBOTICS DEEBOT6 Manual De Instrucciones

Spot Cleaning Mode

This mode is applicable for an area of highly
concentrated dirt or dust. In Spot Cleaning
Mode, DEEBOT6 focuses on a specific area
to clean.
These modes can only be selected using the Remote Control.
*
Return to Charger Mode
When battery power gets low, DEEBOT6 automatically switches to Return to Charger Mode and returns
to the Charging Dock to recharge itself.
DEEBOT6 can be also be sent back to the Charging Dock at any time by pressing the Return to Charger
Mode Button on DEEBOT6 or on the Remote Control.
3. Operating and Programming
Edge Cleaning Mode
This mode is good for cleaning the edges
and corners of a room. In Edge Cleaning
Mode, DEEBOT6 cleans along a border (e.g.
wall).
11
EN