MAAX 10049110 Guia De Instalacion página 5

This task requires
1
two people.
Assemble the structure as indicated on the figure below, using
#8 x 3/4» screws, as indicated.
Note: Use the help of a second person to support the rails
during assembly, or perform the assembly flat on the ground,
after protecting the surfaces with a blanket.
2
Assemble the wall brackets as
illustrated in the above figure
Note: This task should be
performed in two steps.
uNit iNstaLLatioN
1 - stRuctuRe assemBLy
5
x2