Operation; Switching On And Off; Third Hand; Solder Sponge - Parkside PLS 30 Instrucciones De Utilización Y De Seguridad

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Operation

Operation
Q
The mains voltage must correspond with that shown on the sander rat-
ing plate. Equipment labelled as 230 V may also be used with 220 V.

Switching on and off

Q
Switching on:
j
Insert the mains plug into a suitable mains socket.
Switching off:
j
Pull the plug out of the mains socket to switch off the device.

Third hand

Q
CAUTION! DANGEr OF BUrNS! The clips
third hand
workpiece.
1. Fold out the third hand
2. Rotate the clips
3. Clamp the workpiece between the two clips

Solder sponge

Q
CAUTION! The hot soldering tip
contact with a dry solder sponge
may be damaged.
j
The solder sponge
j
Moisten the solder sponge
62 GB/MT
can become hot while you are soldering the
6
upwards.
6
until they are oriented in the required direction.
5
is used to clean soldering tips.
8
before you use it.
8
.
5
must never be placed in
2
, otherwise the solder sponge
8
on the
5

Publicidad

Tabla de contenido
loading

Tabla de contenido