Printer Rear (Supply Side) - Oki IP-5630 Guía De Consulta Rápida

Printer rear (supply side)

• USB port
Used to connect a USB drive to the printer.
• USB connector
Used to connect the printer to a computer.
• Position to install optional exhaust attachment
• Pressure roller up/down lever
A lever used to fixe or release the media.
Moves together with the pressure roller lever at
the printer front side.
• Media holder
To be installed at both ends of
the roll media.
• Caster
Set the lock to OFF when moving the printer and
set the lock to ON when locking the printer.
• Power inlet
Connect the power cable to the power inlet.
29