Cleaning And Storage; Battery Replacement; Temperature Probe Replacement - koban KPA-11T Manual De Instrucciones

EN
8 MAINTENANCE
WARNING: to avoid electrical shock, disconnect the meter from any circuit, remove the test leads from the
input terminals, and turn OFF the meter before opening the case. Do not operate the meter with an open
case.

8.1 Cleaning and Storage

Periodically wipe the case with a clamp cloth and mild detergent do not use abrasives or solvents. If the meter
is not to be used for 60 days or more, remove the battery and store it separately.

8.2 Battery Replacement

- Remove the Philips head screw that secures the rear battery door.
- Open the battery compartment.
- Replace the 9V battery.
- Secure the battery compartment.

8.3 Temperature Probe Replacement

NOTE: To use a Type K thermocouple probe that is terminated by a subminiature (flat blade j connector, a
subminiature to banana plug adaptor is required.
KPA-11T
TRMS CLAMP METER
34 / 46