Disinfection, Servicing; Cleaning And Disinfection; Safety Tips; Infection Control - Hill-Rom Primo P02033 Manual De Usuario

PROPRIETARY AND CONFIDENTIAL DRAFT: octobre 11, 2012

Cleaning and Disinfection

Safety Tips

• Check that the brakes are applied on the bed on which the device is installed.
• Lock out all electrical functions.
• Disconnect the device and stow the power cord.
• Check that the connectors are securely connected to prevent water from
entering the mattress.
• Never clean the device by pouring water on it, or with a high-pressure jet.
• Never use water at a temperature of more than 70°C.
• Avoid excess water on the connectors.
• Refer to the recommendations of the cleaning and disinfecting product
manufacturer.
• Thoroughly dry the device before reusing it.
• Suitable individual protective equipment must be worn during the phases of
the cleaning operations (blouse, gloves, eye protection, etc.).
Failure to implement one or more of these recommendations may lead to damage or
deterioration, preventing use of the device and rendering the warranty void.

Infection control

Insufficient cleaning = risk of infection (biological danger).
All parts must be kept clean at all times in order to avoid the risk of
infection. All necessary precautions must be taken to eliminate all
visible soiling.
The following instructions are not designed to replace more appropriate cleaning and
disinfection protocols drawn up by the hygiene officer or by other bodies for your
hospital in the event of particular infectious situations.
170924(2) - EN - Primo User Manual
™

Disinfection, servicing

Page 25