Purpose Of The Document; Requirements; Intended Use; Guarantee - ABB EVLunic Serie Instrucciones De Manejo

1.2

Purpose of the document

This document describes the operation of EVLunic.
1.3

Requirements

This document contains information for people who want to operate a charg- ing station.
1.4

Intended use

The charging station is intended for charging electric vehicles (such as elec- tric cars). The
connection of other devices (such as power tools) is not al- lowed.
The charging station is suitable for indoor and outdoor use. The charging station has to be
installed vertically on a wall or on a floor-mounted column. The surface for the installation must
be flat and suitably stable (e.g. brick wall, concrete wall). The respective national regulations
must be observed with regard to the installation and connection of the charging station.
The intended use of the device always includes the compliance with the en- vironmental
conditions for which this device was developed.
The charging station has been developed, manufactured, tested and docu- mented in
accordance with the appropriate safety standards. If the instruc- tions and safety instructions
described for the intended use are observed, the product will normally not pose a risk to the
health of persons or damage to property.
Not observing the safety instructions can result in risk of death, in- juries and damage to
the device!
The device manufacturer assumes no liability for resulting claims!
1.5

Guarantee

Only the maintenance work expressly permitted by ABB may be performed. Any other
manipulations to the device will also result in loss of warranty.
A device with broken warranty seals or removed lead seals may no longer be put into operation.
The necessary steps for replacement or repair of the charging station by the specialist dealer or
service partner must be initiated.
1.6

Notes on this document

The manual is part of the product. It is to be retained over the entire life cycle of the product and
should be forwarded to any subsequent owners or users of the product.
The instructions contained in this manual must be followed precisely. Failure to do so could
result in the creation of potential sources of danger or the dis- abling of safety devices. Apart
from the safety instructions given in this man- ual, the safety precautions and accident
prevention measures appropriate to the situation in question must also be observed.
Operating instructions V 1.00 Document: V 1.00 / Document No.: 105728 │ Date 28.05.2018
Introduction
│4