Safety Notes - ABB EVLunic Serie Instrucciones De Manejo

2

Safety notes

WARNING! – Risk of electric shock and fire hazard!
■
■
■
■
■
■
■
■
■
■
■
1)
Persons who, due to their special training, expertise and experience as well as knowledge
of current standards, are able to assess the work per- formed and the possible hazards.
Caution – Possible damage to property!
■
■
■
Operating instructions V 1.00 Document: V 1.00 / Document No.: 105728 │ Date 28.05.2018
Installation, commissioning, maintenance or retrofitting of the charging
station must be performed by correctly trained, qualified and authorized
1)
electricians who are fully responsible for the compliance with existing
standards and installation regulations. For details, see the installation
manual.
The charging station does not have its own power switch. The line circuit
breaker of the supply line serves as a mains disconnector.
The charging station may only be operated in a perfect condition.
A damaged charging station must be taken out of commission and re- paired
or replaced by a qualified and authorized electrician.
A repair of the charging station is not permitted and may only be carried out
by the manufacturer.
No unauthorized modifications and modifications may be made to the
charging station.
No markings (such as safety signs, warnings, wire markings...) may be
removed from the charging station.
Never use faulty, worn-out or dirty charging connectors.
The connection of cable extensions to the charging station's charging cable
is not permitted.
The charging station must be checked regularly for damage to the hous- ing
as well as for defects, wear and soiling of the charging socket or the
charging connector including the charging cable.
Observe the information and instructions for your vehicle carefully before you
charge the vehicle using the charging station.
Pull the charging cable out of the plug holder only by the plug and not by the
cable.
The charging cable may not be not damaged mechanically (kinked, pinched
or driven over) and the contact area is not allowed to come into contact with
sources of heat, dirt or water.
Never clean the charging station with aggressive solvents and cleaning
products, scouring materials, water jets (e.g. garden hose, pressure cleaner
etc.) or excessive pressure.
Safety notes
│6