Eu Declaration Of Conformity - SATA air vision 5000 Instrucciones De Servicio

The breathing protection apparatus serves to protect your health. Careful
handling together with constant maintenance and care of the components
is necessary to warrant this function.
Attention!
Damage from unsuitable cleaning agents
The breathing protection equipment can be damaged by the use of ag-
gressive cleaning products.
→ Do not use aggressive or abrasive cleaning agents. Use
SATA wet & dry cleaner (Art. No. 75358) for cleaning.
→ Incedur by the company Henkel can be used for disinfection.
Clean the breathing protection apparatus every time after it has been
used, also check that it functions properly and does not leak; disinfect the
breathing protection hood if necessary. New units and spare parts have a
shelf life of 5 years as long as they are stored in air-tight packaging.
5. Malfunctions
If it is not possible to remedy the malfunctions with the corrective action
described in the operating instructions for the individual components,
send the components to the SATA customer service department. (For
address see chapter 6).
6. After Sales Service
For accessories, spare parts and technical support, contact your SATA
dealer.

7. EU Declaration of Conformity

We hereby declare that the product described in the following complies
with to the fundamental safety and health requirements of EC-Directive
89/686/EEC in its design and construction type as well as in the version
as it is produced and distributed by us.
This Declaration loses its validity in case of any alteration to the device
that has not been approved by us.
Manufacturer
SATA GmbH & Co. KG
Domertalstrasse 20
D-70806 Kornwestheim
Product description
■ Breathing protection hood SATA air set
Applicable harmonised standards
Operating instructions SATA air vision 5000 system
EN
45