To Fix The Cable To The Handle; To Assemble The Grass Box; Operation; Before You Do Operation - Gardena PowerMax Li-40/32 Manual De Instrucciones

Ocultar thumbs Ver también para PowerMax Li-40/32:
Tabla de contenido

Publicidad

4. Tighten the wing nut (6).

To fix the cable to the handle

7
8
1. Fix the cable (7) to the handle with the clip (8).

Before you do operation

WARNING!
Risk of physical injury!
Cut injury when the blade turns or the
product starts accidentally.
Wait for the blade to stop, remove the
safety key and use gloves before you
attach the battery or transport the
product.

To charge the battery

CAUTION!
Damage to the battery or the battery
charger!
Overvoltage damages the battery and the
battery charger.
Make sure that you use the correct mains
voltage.
Before you use the battery the first time, the battery must
be fully charged.
The lithium-ion battery can be charged in any state of
charge and the charging process can be disconnected at
22
2. Check that the cable (7) is not trapped between the
lower and the upper handle.

To assemble the grass box

11
9
1. Push the chute (9) into the grass box until it clicks.
2. Turn the cover (10) on the grass box.
Make sure that the cover (10) aligns to the grass
box.
3. Push the cover (10) on the grass box until the
connections click.
Make sure that all connections are connected.
4. Push the handle (11) into the cover (10) until it clicks.

Operation

any time without to damage the battery (no memory
effect).
14
C
For GARDENA Electric Lawnmower Art. 5033-20:
The GARDENA Battery BLi-40/100 Art. 9842 is in the
scope of delivery.
1. Connect the mains cable (14) to the battery charger
(C).
2. Connect the mains cable (14) to a 230 V mains
socket.
10
15
E
13
12
22 - 001 - 05.10.2016

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

5033

Tabla de contenido