Store Weight Value (Hold) - Seca 704 Manual De Instrucciones Y Garantía

Store weight value (HOLD)

You can also continue displaying the weight determined once the load has been removed.
This makes it possible to look after a patient first, before having to note the weight:
– Press the HOLD key whilst the load is
on the scale.
"HOLD" appears in the digital display.
The value remains saved in the display
until the hold function is automatically
switched off.
The triangle with the exclamation mark
indicates that this frozen display is an
additional facility which is not subject to
calibration.
– The HOLD function can be switched off
by pressing the HOLD key again.
appears in the display if the scale
0. 0
has no load on it, otherwise the current
weight. The "HOLD" display vanishes.
Note:
The HOLD and TARE functions can also be used simultaneously.
Body Mass Index (BMI)
Body Mass Index puts height and weight in relationship to one another, providing more
accurate information than ideal Broca weight, for example. A tolerance range is given
which is considered ideal for health.
– Press the Start key with no load on the
scale.
,
se(a 8. 8 . 8 . 8 . 8 .
secutively in the display. The scale is
then automatically set to zero and ready
for operation.
– Press the FUNC/SET key.
On the display, you will see the last
height entered.
– You can use the arrow keys to adjust
the value in increments according to the
graduations displayed.
– Once the correct value is set, press the
FUNC/SET key again. The BMI function
is now activated.
– Step on the scale and keep still.
– Read off the BMI on the digital display
and compare it with the categories on
page 23.
– Press an arrow key if you would like to
see the weight briefly.
22
and appear con-
0. 0