Setting The Time - Oakley FUSE BOX Manual De Instrucciones

The crown can be pulled out to two click positions. The
first click position is for setting the date. The second click
position is for setting the time.
To set the timepiece for the first time (or to reset the date
and time after the battery is replaced), do the following:
1. Pull the crown out to the first click position (a).
2. Turn the crown clockwise until yesterday's date appears.
3. Pull the crown out to the second click position (b).
4. Turn the hands counterclockwise until today's date
appears, then continue forward until the current time
is reached. If the current time is in the afternoon or
evening, move the hour hand all the way around the
dial to pass 12 o'clock noon.
5. Push the crown back in.
To set the exact second, wait until the hand on the
second-counting sub-dial (at the right of the main dial
face) points straight up before you pull out the crown
to the second click position (b). Set the time then wait
until the exact second is reached before pushing the
crown back in.
OAKLEY FUSE BOX
Hour Hand
Minute Hand
Date
INSTRUCTION MANUAL | 3
™

SETTING THE TIME

Second Hand
Crown
a b