Using The Alarm; To Set The Alarm - Oakley FUSE BOX Manual De Instrucciones

6 | OAKLEY FUSE BOX
™

USING THE ALARM

A dedicated hand (the lowermost hand) indicates the
time setting for the alarm. The alarm can be set up to 12
hours in advance. Use the inner time scale on the main
dial face when setting the alarm.

TO SET THE ALARM

1. Pull the crown out to the first click position (a).
2. Turn the crown counterclockwise until the alarm hand
reaches the desired time. Note: Do not rotate the
crown clockwise as it will change the date.
3. Push the crown back in.
TO USE THE ALARM
function ON, press and hold button "B" until you hear
two beeps. To turn the alarm function OFF, press and
hold button "B" until you hear one beep.
stop the alarm.
If button "B" is not pressed during this period, the
alarm will sound again after 1.5 minutes. If button
"B" is not pressed during this second alarm, the
alarm will shut off automatically.
Note: If button "B" is pressed while the alarm tone is
sounding, the alarm function is turned off automatically.
INSTRUCTION MANUAL
Alarm Hand
Crown
a
Button "B"