Carlson Pet Products EASY CLOSE Manual De Proprietário página 6

STEP 4
When you are satisfied with the general placement of your gate, fully tighten the threaded
spindle rods attached to the lower corners of the gate by further rotating the adjustment wheels.
Continue by tightening the upper threaded spindle rods. As you tighten the threaded spindle
rods, you will notice the gap between the door frame and the latch begin to narrow.
In order for the gate to function properly, ensure that you extend each threaded spindle rod
equally to create a firm pressure connection between the wall and your gate.
NOTE: There should be equal spacing among each of the (4) threaded spindle rods. Make the
appropriate adjustment to ensure you have installed your gate safely.
ENGLISH
6